Brisbane Lock Repair Tips

Door locks, however reliable they may be, are not entirely maintenance-free. But since the average homeowner knows about these devices next to nothing, they don’t pay attention until a problem arises. Most of these problems require no visit from a licensed locksmith. A little information and an elbow grease smidgen are all you need to handle yourself with the following problems of repairing the lock. I strongly suggest you to visit Brisbane Lock Repair to learn more about this.

Sticking and Capturing

Even if you keep your keys absolutely clean (which most of us don’t), wear and tear will allow rust and grime to build up within your locks at your house. Over time, these accumulations due to sticking or seizing can cause a breakdown of basic functioning. You must test the mechanism with two simple steps to tackle this common problem. First, you have to insure the key slides into the lock easily. If it doesn’t, it means its passage is being obstructed by something. If the key slides all the way in, then the second step is to try and turn the mechanism around. If turning is hard, jiggling the key can dislodge the dirt and debris that prevents movement. Anyway, the probable culprit is lack of lubrication.

While there are many household lubricants that are all-purpose, such as WD-40, they can potentially trigger further accumulation inside the system. As such, most specialists say to use graphite material. This dry lubricant is widely available in hardware stores and in home improvement centers and is directly inserted into the keyhole for door lock repair. These may be found on screws and latches, as well.

Don’t Click

When you’re making a new set of keys, there’s a chance that they won’t work as intended. The most common reason for this is because they have rough edges which have to be filed off. As a consequence, they may fit inside the keyhole but can not turn the mechanism around. With a trip to your local locksmith the problem is easy enough to fix. If he was the one who made the set for you, he should be dealing with the issue at no cost.

However, there are some instances where a key which won’t turn is a sign of a bigger problem. Since protection systems have several moving parts there might be something wrong with some of them. As a consequence, a qualified locksmith may need to disassemble the device and rebuild it. In this example , getting the door lock replaced may be cheaper.

Issues concerning deathbolt

If the deadbolt doesn’t catch, the striker must have a problem that is the flat metal plate on the door frame into which the deadbolt slides. Loose screws which usually caused the problem to shift slightly to the striker. Removing the plate, repositioning it, and screwing it back into place should allow smooth functioning of the deadbolt again.